Fixing the weakest link on my LS3 Miata. (surprise damage)

  Դիտումներ 139,296

Taylor Ray

Ամիս առաջ

One part of the LS3 Miata has been begging to fail, so we rebuild it and beef it up, as well as finding and fixing some other damage as well.
You can buy some merch and help support the channel! -
Tools Used
Milwaukee Bandsaw - With This Stand -
Cheap Plasma Cutter -
Milwauke Tool Die Grinder -
Milwaukee Tool Headlamp -
Small Milwaukee Flood Light -
Milwaukee Tool Underhood Light -
Milwaukee Tool Mid Torque 1/2" Impact(2861-20)
Milwaukee Tool Stubby 3/8" Impact (Small Most Used Tool)-
Milwauke Tool 3/8" Ratchet (Life Changing) -
Milwaukee Tool 1/4" Ratchet -
Milwaukee Tool Ratchet Wrenches -
M12 Drill/Driver -
M18 Drill/Driver -
Gearwrench 3/8 Socket Set Mid Length (Very Nice Sockets) -
Gearwrench 3/8 Socket Set Deep -
Multiprocess Welder -
Drill Bits -
Thanks to all who support me on Patreon! -
IG - taylordrifts
Twitter - taylordrifts
Email For business Inquires -

Project Harmony - Bus Life Oz
Project Harmony - Bus Life Oz 24 օր առաջ
man that sounds awesome now i love it!!!
James Tucker
James Tucker Ամիս առաջ
bro how tall are you cause i wanna get a miata but dont know if i can fit in one?
Willy Ամիս առաջ
Where are you walls?
Lithium Center
Lithium Center Ամիս առաջ
That bucking problem is an issue in your tuning. Get ahold of Adam LZ and talk with him about it. His tuner is pretty good at fixing those problems
Justin Smith
Justin Smith Ամիս առաջ
Bucking needs fuel. Holly auto tune problems?
Andreas Karlsson
Andreas Karlsson Ամիս առաջ
Why not weld a nut on the top?
Marvin Harris
Marvin Harris Ամիս առաջ
Take the miata to a qt mile track to get some estimates on how fast it is
LoneClaw Ամիս առաջ
Hey Taylir mate if u want an industrial pressure washer, get a karcher 6/12c, theyre fucking amazing
Wyatt Johnson
Wyatt Johnson Ամիս առաջ
I would love to eventually see a Magnuson supercharger on the miata
Zdenko Tijanić
Zdenko Tijanić Ամիս առաջ
There is not too much load except weight, you should have stiffened the existing ones a bit.
Chris Conti
Chris Conti Ամիս առաջ
Please invest in a drill press of some sort and a decent vise for it. You wont ever go back to drilling things by hand for fabrication.
Time 4 Boost
Time 4 Boost Ամիս առաջ
Miata sounds so savage, absolutely love it. 👍 Maybe log your tps, if its a standalone ecu, could be that Acceleration Enrichment TPSdot value is set too low, so triggering AE at light throttle maybe!
Christopher Head
Christopher Head Ամիս առաջ
I picked up an 04 Ls 6 speed complete not running. No body damage. Not running . No spark.Got it running for 40 bucks. Crankshaft sensor and pie plate (CRANK POS. INDICATOR). I love your style of repairing things. Constantly upgrading and improving.This is what I have in mind for my ride. u give me ideas all the time.My car is due for suspension upgrade . Bought OHLINS ROAD AND TRACK PKG. Brakes old... worn. Got best bbk package I could find 11.75 " rotors. Wildwood calipers front and back. Went as big as I could , want it to stop with the v8 hp. What are u using to mount the motor. Did u make the front subframe or buy it? V8 roadster makes a piece I think would fit and work. I was thinking of making one. Would u make one of those or is it too important to think I could fabricate this. U do Amazing things. I am impressed every time I watch u. Tai u da best
d zero
d zero Ամիս առաջ
23:15 - I dub thee ... *Miata von Rowdy* _!_
SandersCSclips Ամիս առաջ
what rear diff do people usually use in these modified miatas
Michael Luberto
Michael Luberto Ամիս առաջ
Check out the modifiers in the Holly Software And data log it next time it does it NA Engines With large fixed cams Are incredibly hard to tune that out at low rpm.
James Young
James Young Ամիս առաջ
Give Kevin a call and see if he has any suggestions.
Gabe Ayres
Gabe Ayres Ամիս առաջ
Definitely worth changing the cord on your old grinder and keeping it too, love having multiple with different discs so you don't have to change them out!
Jason Petrich
Jason Petrich Ամիս առաջ
Try that other truck throttle body first , it might be starving for air a tiny bit at idle or low acceleration,would be easier than changing back to drive by cable for now
RandomGuyWithaMazda Ամիս առաջ
ooooooo man the heat-cycling has really blinged out the titanium. AMAZING
paul campagna
paul campagna Ամիս առաջ
@25:26 Good reaction. Guy never saw you.
Elliot Carter
Elliot Carter Ամիս առաջ
Is the bucking issue at very low pedals? Send me a log, I might be able to help.
Nolan Dean
Nolan Dean Ամիս առաջ
I know nothing about fab and welding but is it possible to weld the nut on the top so you don’t have to use a wrench? Then it would be like you are putting the bolt in a threaded hole essentially
Matthew Wilkie
Matthew Wilkie Ամիս առաջ
grinding sparks on camera, not good, rectified quickly lol
Ronnie Lang
Ronnie Lang Ամիս առաջ
I really respect how clean you are with your work!
Paul Tomechko
Paul Tomechko Ամիս առաջ
What are those pliers you always recommend?
Johnny Applesauce
Johnny Applesauce Ամիս առաջ
Ummm that mount should be over the tabs and bolted to them not under the tabs just hanging from the bolts !!
Don C
Don C Ամիս առաջ
Dude, just order a replacement power cord from DeWalt’s parts website. They aren’t expensive, around $12.00 and easy to replace.
Philip Crocker
Philip Crocker Ամիս առաջ
Why not shorten the exhaust and have the turn downs at the Vband before the diff?
Colton Maxey
Colton Maxey Ամիս առաջ
Anyone know the like technical name of that spacer tool he used for welding?
tsp media blasting
tsp media blasting Ամիս առաջ
Why dont you weld the nuts on for the gearbox support?
Talonts Ամիս առաջ
You need to buy/build oval pipes for that diff transition - you can get the cross-section of that big pipe but more easily fit it on those narrow spaces. You might also want to consider buying/building oval pipe for most of it past the trans, for more ground clearance.
Justin Flaherty
Justin Flaherty Ամիս առաջ
Man I just watched one of your old videos and this video and you lost a lot of weight😂😄
big steve
big steve Ամիս առաջ
Where's Sandy been at? I miss her :(
Kris.Ivanovv Ամիս առաջ
Taylor, please paint the bashbar.
Kie Cooper
Kie Cooper Ամիս առաջ
Bet your neighbours love you 😂😂
Mike Scherrer
Mike Scherrer Ամիս առաջ
Man it gives me anxiety watching you use the band saw with gloves on, especially with how close you got your fingertips cutting that thin piece. Those gloves aren’t going to save your fingers and may get your hand pulled into the saw. I’m generally a pretty safety third kinda guy... but it would be a literal tragedy if you lost your hand or finger, man.
Kevin Ralph
Kevin Ralph Ամիս առաջ
Zak Naqvi
Zak Naqvi Ամիս առաջ
23:49 the people in the white suv must be either hella confused/scared or hyped that theres an ls miata ripping behind them
Nick Palmer
Nick Palmer Ամիս առաջ
Hey taylor just to let you know to get low cars on lifts you can unscrew those arms all the way and put hockey pucks in as a rubber bushing as well as to lift a car a little more!
Kurt Chaney
Kurt Chaney Ամիս առաջ
Rear bash bar neeeeeeds paint
Nick Stymacks
Nick Stymacks Ամիս առաջ
Weakest link on your Miata at this point is the Miata lol
Magoogle Ամիս առաջ
I have the same bucking issue on my LQ9 S2000 build. Anything under 2k she can start bucking, I figured it was just cause of the big cam. Im also DBW.
Gribbles Garage
Gribbles Garage Ամիս առաջ
I like that little band saw set up
George Hampl
George Hampl Ամիս առաջ
There seems to be something wrong with little guys back legs. Don't you think?
Paul Forrester
Paul Forrester Ամիս առաջ
I’d try another throttle body before converting bk to cable . Check your TPS voltages
BigDirtyFo Ամիս առաջ
OOOOO HE'S GOTTA NOTHER BENPAK LIFT! Another assembly video coming soon 👀🙌🏾
Sean Henderson
Sean Henderson Ամիս առաջ
You could probably almost dump those earlier at an angle infront of the rear tires
Eric Reynolds
Eric Reynolds Ամիս առաջ
When’s the shop getting closed in!? Every new video I keep thinking it’s gonna be the one.
Ed A
Ed A Ամիս առաջ
Outline the floor for your ramps and put some grip on that so they will not slid out. How about some heat shielding?
Kevin Smith
Kevin Smith Ամիս առաջ
@taylor ray plz put more hoodies up with the other decals on them i would love a ls love hoodie
Travis Reising
Travis Reising Ամիս առաջ
Taylor question would the RX7 be more competitive then the Mita if you upgraded everything on the car
TheEveryDayDriver Ամիս առաջ
Try adams tuner.
r Ամիս առաջ
how's that pressure washer? If its any good do you have a link?
Wind Dancer Two Eagle
Wind Dancer Two Eagle Ամիս առաջ
Any one else wait for him to say how nice it is to weld titanium.
SpicyRiceVlogs Ամիս առաջ
I don’t know much, but for clearance, couldn’t you just use oval tubing in the rear? It would be small than circle tubing.
Sam Domino
Sam Domino Ամիս առաջ
What a nice friday night. Kids in bed crack a beer and watch one of my favorite youtubers
Tre' Deeter
Tre' Deeter Ամիս առաջ
paint the bashbar man .... why let beautiufl work go to rust..... just saying i love you
keithdatSKRdrift Ամիս առաջ
For the bucking, use the off-road technique of planting the side your foot against the trans tunnel, and roll your foot onto the throttle. Planting it there removes the weight of your leg moving with accel/decel causing bucking.
Marc Ամիս առաջ
are you going to get more air tools now?? l
How Fast
How Fast Ամիս առաջ
6:34 don't forget how convenient this is when you go to put to the walls on the shop. (Maybe leave a side door) 😉
amar Ամիս առաջ
grab a new cord for that dewalt grinder and swap it out, the `tool repair` section of the videos. :) id watch.
Ken blank
Ken blank Ամիս առաջ
I like your camera and edit work! NICE JOB
Aero Fox
Aero Fox Ամիս առաջ
Still the best channel on yt
Christopher Goldberg
Christopher Goldberg Ամիս առաջ
Do these engines use MAF's?
Joshua Miner
Joshua Miner Ամիս առաջ
If you use bleach white tire cleaner on the dewalt tools it will clean the plastic
Will Moto
Will Moto Ամիս առաջ
Has a brand new air compressor, Uses electric tools for everything lol.
Beemer Box
Beemer Box Ամիս առաջ
The Trans Mount was weaker after the guys did the titanium exhaust. The mod they did it was to get it out and the strength of modifing was not considered in the least bit. As much as you paid for Fab work they should have done you right and constructed consulted what the remedy should be done.
ashton cline
ashton cline Ամիս առաջ
You are going to like that makita grinder
ashton cline
ashton cline Ամիս առաջ
@Taylor Ray if you want to subscribe to my channel
Taylor Ray
Taylor Ray Ամիս առաջ
I love it. I really like the full length paddle and shortness of it.
mopargaming Ամիս առաջ
Matt Flang
Matt Flang Ամիս առաջ
Some times when u build a race car it has poor street manners.
Cody Kain
Cody Kain Ամիս առաջ
Love these videos of Taylor fabricating. That does it I’m buying merch
Evan Peck
Evan Peck Ամիս առաջ
3:56 same
drowe910 Ամիս առաջ
gimme back my grinder!
Adam 12
Adam 12 Ամիս առաջ
Dude where is sandy
Scott Young
Scott Young Ամիս առաջ
Hey Taylor, is there a reason why you didn’t decide to weld the shims that go on the top of the trans mount while you had it all down? Did you use aluminum instead of steel?
Taylor Ray
Taylor Ray Ամիս առաջ
Yeah they’re aluminum. And I don’t want to make it permanent. I may re do the mount at some point.
Boz's Garage
Boz's Garage Ամիս առաջ
does milwaukee sponser you in anyway? you seem to have ALOT of there tools.
SOULESS Ամիս առաջ
hey Tray! what TPI blades do you use on that there band saw? About to buy the same setup but they don't come with blades... figured i'll come ask the professional.
kyestar88 Ամիս առաջ
Glad you got everything fixed it's insane how something as simple as an exhaust leak can make the car sound so course
biggabenne Ամիս առաջ
yo saw that truck just keep movn saw the wreck comin just like i was a passenger nice dodge
Mitchell Curtis
Mitchell Curtis Ամիս առաջ
If it keeps coming back probably not in the tune sounds sensor related. Idk if your on speed density, but if not could be a funky o2 sensor or maf.
Lucad Morgan
Lucad Morgan Ամիս առաջ
Should do side exit would fix all ur problems with exhaust
Brandon Trupp
Brandon Trupp Ամիս առաջ
Dog box time i think Taylor
Michael Castorino
Michael Castorino Ամիս առաջ
For the bucking (cam surge) try pulling a little timing out where its doing it. Thats some of the drivability issues that come up with large cams. Thats why you usually dont want the biggest beefiest cam on the market for a daily driver, they only like the top of the power band. But, pulling some timing should do wonders. Also, I sent Ben some info a few months ago on how to adjust your injector end angle and a kid, from the Holley groups, that will do it for you for free in your tune. That was by far the biggest improvement I ever made to the drivability of my set up with the Holley.
scooz14 Ամիս առաջ
just turn the exhaust down and dump it in front of the diff towards the ground.
Taylor Ray
Taylor Ray Ամիս առաջ
You can’t it’ll heat soak the gas tank and boil the fuel. I’ve done that.
Zach Dial
Zach Dial Ամիս առաջ
Am I the only one who wants to see a Taylor and gigum youtuber colab
Nathan 909
Nathan 909 Ամիս առաջ
I bet it's something with the harness or a ground..or where its grounded..
macfarrell Ամիս առաջ
one of the first rules of metalwork, no gloves to be used with rotating machinery! and why dont you put some thin sheet metal on that table, equals ground everywhere, great for welding and plasma cutting!
Taylor Ray
Taylor Ray Ամիս առաջ
I’m going to be building a fab table soon once the front of the shop is closed in. This will be a cutting table
gord kostyk
gord kostyk Ամիս առաջ
Hey Taylor put the back bumper back on.. Looks way better with the body bumper on...
CalsGarage Ամիս առաջ
With all the pressure washing you do-you should check out some of the AM-posts vids of these pressure washing/car washing stations if you haven't already. I think that's one of the projects I'll be doing.
Korruptionen Ամիս առաջ
Garage mod ideas. Remove door threshold. Install door sweep. Enjoy carts more. Ask General Manager Sandy for a raise. :)
David Lindsey
David Lindsey Ամիս առաջ
LZs mom feels your pain with the bucking LS swap 🤣
Tyler Klein
Tyler Klein Ամիս առաջ
Anyone else's butthole pucker when that truck started pulling out?
Trever Monk
Trever Monk Ամիս առաջ
Some of that bucking is likely the camshaft. May never be able to solve it completely. When it’s doing that put the clutch in and rev it up. It’s probably getting loaded up with fuel.
mike bryant
mike bryant Ամիս առաջ
Where is sandy? I haven't seen her since you moved to your new house
Dylan Knapp
Dylan Knapp Ամիս առաջ
The people who dislike these video confuse me... Its not like your watching these as a DIY... #supporttaylorray
ViZioN Ամիս առաջ
if it aint broke dont fix it
Jared Thomas
Jared Thomas Ամիս առաջ
Maybe intake manifold gasket?
Craig Deeds
Craig Deeds Ամիս առաջ
The one thing I admire about you is how neat and organized your shop is. So many shops are so messy it irritates me.
Taylor Ray
Taylor Ray Ամիս առաջ
It’ll be way better when the fronts closed in and I can put up shelving.
S M Ամիս առաջ
Where's Sandy?
Buying a cheap lawn mower and fixing it up.
Taylor Ray
Դիտումներ 125հզր
Epic Cycling on Ice
The Q
Դիտումներ 46մլն
Gevorg Sirekanyan - Im Tulutyunn Es
Gevorg Sirekanyan
Դիտումներ 441հզր
Super Sako feat. Kan - Sunshine & Rain (Official Music Video)
Cefiro K Swap Build. Redoing a lot of work to make it better
I Accidentally bought more Upgrades for my new Pulsar GTI-R
Spray painting my FC RX7. Can it actually look good?
Taylor Ray
Դիտումներ 225հզր
Turbo K24 Cefiro Build pt.13 Making it all work.
Taylor Ray
Դիտումներ 130հզր
Fixing The Biggest Problem With My LS3 Miata.
Taylor Ray
Դիտումներ 118հզր
Testing the limits of my off-road trailer.
Matt's Off Road Recovery
Դիտումներ 269հզր
Running an 8 Second Pass my Second Time EVER Drag Racing!
Epic Cycling on Ice
The Q
Դիտումներ 46մլն
Gevorg Sirekanyan - Im Tulutyunn Es
Gevorg Sirekanyan
Դիտումներ 441հզր
Super Sako feat. Kan - Sunshine & Rain (Official Music Video)
Нашли капсулу времени - Хаммер на котором не ездили